V8 Kit, Ford Coyote Vertical Stacks Kit - Part 200126


Billet machined air horns
x
Borla makes the finest air horns in the world. Machined from 6061 T6 bar stock in our Haas CNC lathe the Coyote Vertical Stacks horns are 80mm tall. There are optional 35 and 50mm tall horns available.
Billet capstan linkage kit
x
Machined from 6061-T6 billet and incorporating high quality bearings and hardware our linkage kit sets the standard for the industry.
Adjustable Fuel pressure regulator
x
Borla's low-profile pressure regulator is machined entirely from billet 6061 T6 alloy. Incorporating a diaphragm made from a double layer of flourocarbon, it is able to handle fuel for up to 1400 BHP.
Throttle position sensor
x
The throttles kit includes a high quality Hall Effect throttle position sensor.
Cast Alloy Valley Plate
x
Our valley plate is CNC machined from an A-356 aluminum casting. The design incorporates a vacuum accumulator which allows the use of the Borla's MAP sensor and idle air control.
Cast aluminum manifolds
x
Our cast aluminum manifolds are CNC machined from A356 alloy and accurately matched to the stock ports
Fuel Injectors
x
50lb/hr EV14 injectors are supplied with the Ford Coyote Vertical Stacks Kit.
High volume -10 fuel rails
x
Our Dash 10 fuel rails provide more than adequate fuel reserve for acceleration on high horsepower engines.
Eight 55mm Throttles
x
Sized to provide a wide performance window from street rod to race car, these throttles are machined from 6061-T6 billet
Part Number
200126
Price
$6,751.71

Installed Examples Gallery

Description

For the street-rod enthusiast who requires the look of vertical stacks, BORLA brings you these throttles for the Ford “Coyote” engine.

From our no-compromise billet machined velocity stacks through eight 55mm CNC machined throttles, to manifolds flow-matched to the inlet port, BORLA brings you a traditional 8 stack looks with virtually unlimited power potential.

Can We Help You? Our experts can help you pick the best options for your application. 1-877-462-6752 Mon-Fri 7:30am-4pm PST
CUSTOMIZE YOUR KIT
Choose from the options below!

NOTE:
Some images below are representative and may not match your kit.

AVAILABLE KITS

Kit
Select your Kit

    • V8 Kit, Ford Coyote Vertical Stacks
    • 200126
    • $6,751.71

POWDER COATED FINISH

Powder Coat Finish
A Classic Appearance

Available for throttle bodies, the manifold, or both. Striking contrast that shows off the sophisticated components of your BORLA® Induction Throttle Body Kit.

    • Powder-Coat Throttle Bodies
    • 206298
    • $200.00
    • Powder-Coat Manifold
    • 206299
    • $200.00

POLISHED FINISH

Polished Finish
That Show-Winning Touch

Enhance your engine bay even more with mirror-polished induction jewelry. Available for air horns, throttle bodies and the manifold. Creates a truly custom show-stopper look.

    • Polish Air Horn
    • 206303
    • $300.00
    • Polish Throttle Body
    • 206300
    • $450.00
    • Polish Manifold
    • 206301
    • $680.00
    • Polish Fuel Rail
    • 206460
    • $72.00

HIGH PRESSURE FUEL PUMP

High Pressure Fuel Pump
Designed for Rigors of Racing

The choice of BORLA® engineers, Bosch premium competition-grade pumps meet the fuel delivery needs of high-performance racing engines. Fittings Kit also available.
    • High Pressure Fuel Pump
    • 206259
    • $415.88
    • Fuel Pump Fitting Kit
    • 203057
    • $79.46

IDLE AIR CONTROL

Idle Air Control
Idle Air Control

Provides the extra air needed to meet the demands power steering & air conditioning put on your engine. Also increases cold start RPM.
    • Idle Air Control
    • 205038
    • $219.01

FAST ECU KIT

Fast ECU Kit
For the Ultimate in Reliability

Featuring the latest in flash micro-processor technology for faster processing speeds. Engine-specific wiring harnesses simplify installations!
Pricing on Request
CUSTOMIZE YOUR KIT
SELECTED KIT
POWDER COATED FINISH
INJECTORS
POLISHED FINISH
HIGH PRESSURE FUEL PUMP
IDLE AIR CONTROL
SUBTOTAL
Add to Cart
[x] close